Step 1: Power On
When you receive a touchscreen all-in-one machine, you should know that it uses 100-240V AC power. Then, plug it in and power it on using the remote control or the standby button on the all-in-one machine.
Step 2: Boot into Computer System
After powering on, please wait about one minute for the all-in-one machine to fully boot into the computer system.
Step 3: Connect to Network
Confirm that the touchscreen all-in-one machine's wireless Wi-Fi device is connected to the USB port on the back of the computer, or connect the network cable to the computer's network port. Check the bottom right corner of the screen to see if the network connection is successful. A network connection will allow the interactive touchscreen all-in-one machine to use more functions.
Step 4: Use and Writing
Once the touchscreen all-in-one machine is successfully connected to the network, you can use it for conferences or multimedia teaching. Use your finger or a stylus to tap the screen to use and write. It's no different from using a regular PC.
Step 5: Connect to Set-Top Box
If connected to a set-top box, the touchscreen all-in-one machine becomes an all-in-one TV, and watching TV programs on it is perfectly fine. You can control it using a remote control.
After using the touch screen all-in-one device, please shut down the computer system first, and then disconnect the power. Do not disconnect the power directly to prevent the computer system from crashing due to improper shutdown.
